HOME > Products > Indu. Managed Switch > ICES-3080
ICES-3080
8 10/100TX Managed Industrial Switch
- Support Adv-Ring less than 10ms self-recovery & MSTP
- Adv-Ring2M covers Dual Rings, Multiple Rings, Redundant Coupling, cascade Chain, Dual Homing.
- Environmental Monitoring for real time voltage, currentand case ambient temperature
- DDM threshold monitoring with dB values
- Loop protection prevents network attack and Loopback cable protection.
- Support Advanced SNMP including QoS, IGMP V2 /V3 snooping and query
The Netzin ICES-3080 is an 8-port 10/100BaseTX industrial switch. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, Double tag VLAN, IGMP V2/V3 snooping and query, Loop protect prevents network attack and loopback cable protection, Environmental monitoring for real time case ambient temperature, as well as SNTP and SMTP etc.
Netzin ICES-3080 builds all the important management features required in large network like, DHCP Client/Server, 802.1X authentication, IGMP Query / Snooping, advanced QoS and QinQ (double tag VLAN).
The Netzin ICES-3080 supports Adv-Ring2M and MSTP. The Adv-Ring is an auto-recovery path within 10ms yet minimizing the dedicated port for traditional ring protocol.; MSTP can allow RSTP over VLAN for redundant links. The built-in factory reset button and watchdog design can restore all setting back to factory default and automatically reboot the switch under certain circumstance.
The Netzin ICES-3080 is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory and other factory assembly lines where needs Ethernet connective functionality. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
- RJ-45 Port Support Auto MDI/MDI-X Function
- Back-plane (Switching Fabric): 1.6Gbps
- 1Mbits Packet Buffer / 8K MAC address table
- IP-30 Protection with DIN rail and wall mount design
- Redundant Power Design
- Each UTP port is protected from 8KV air & 4KV contact surge
- IEEE 802.1d Spanning Tree, IEEE 802.1w RSTP& IEEE 802.1s MSTP
- IGMP with Snooping and Query mode for Multi Media Application; Menu multicast filtering by ports
- Support IP multicast dynamic source learning for IP CAM and video.
- Port Based VLAN, 802.1Q Tag VLAN, GVRP
- Double Tag VLAN (Q in Q),
- Port Trunk with LACP
- Supports IEEE 802.1ab LLDP
- Supports IEEE 802.1p CoS, 4 priority queues per port
- Port base, Tag Base and Type of Service Priority
- Supports Ingress Packet Filter and Egress Rate Limit
- Supports Broadcast/Multicast Packet Filter Control
- Port Mirror: Monitor traffic in switched networks
- TX, RX, Both of TX and RX Packet
- System Log Server/Client
- SMTP e-mail Alert up to 6 emails
- Security
- Port Security: MAC address entries/Filter/MAC violation
- IP Security: IP address security management to prevent unauthorized intruder
- Login Security: IEEE802.1X/RADIUS
- Loop Protection: prevents network attack, loopback cable detection and Miss-wiring avoidance
- Optional environmental monitoring for system input voltage, current, ambient temperature
- SNMP Trap
- Device cold start, Power status, Authentication failure, Ring changed, Port Link up/Link down.
- Relay Alarm Output System Events
- TFTP Firmware Update & System Configure Restore/Backup
- Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances
Hardware Specification |
|
IEEE Standards |
IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.3af Power over Ethernet IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE802.1p Class of Service IEEE802.1Q VLAN Tag IEEE802.1x User Authentication (Radius) IEEE802.1ab LLDP |
Switch Architecture |
Back-plane (Switching Fabric): 5.6Gbps |
Transfer Rate |
14,881pps for Ethernet port 148,810pps for Fast Ethernet port |
Packet Buffer |
1Mbits |
MAC Address |
8K MAC address table |
Flash ROM |
4Mbytes |
DRAM |
32Mbytes |
Connectors |
10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function RS-232 connector: RJ-45 type |
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) |
Protocol |
CSMA/CD |
LED |
Per unit: Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green) 8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow) |
Power Supply |
Ethernet Data input 12V~48VDC; Redundant power connective removable terminal block for master and slave power; |
Overload current protection |
Present |
Operating Humidity |
5% ~ 95% (Non-condensing) |
Operating Temperature |
Standard: -20°C~60°C / -4°F~140°F Wide Operating Temperature for E models: -40°C~75°C / -40°F~167°F |
Storage Temperature |
-40°C~85°C / -40°F~185°F |
Case Dimension |
IP-30, 59.6 (W) x 105 (D) x 152 (H) mm |
Weight |
900 g |
Fan Number |
0 |
Installation |
Wall mount or DIN-type cabinet install |
MTBF |
190288 hrs |
EMI & EMS |
FCC Class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 EN61000-6-2(EMS) EN61000-6-4(EMI) |
Stability Testing |
IEC60068-2-31 (Drop off), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) |
Power Consumption |
9.86 W (no PoE load) for Ethernet data at full load |
Warranty |
2 years |
Software Specification |
|
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1215 Traps MIB, RFC 1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 EtherLike, RFC 1757 Rmon, RSTP MIB, Private MIB, LLDP MIB |
VLAN |
Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.) GVRP (256 Groups) Double Tag VLAN (Q in Q) |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree; IEEE802.1s Multiple Spanning Tree |
Adv-Ring |
Provides redundant backup feature and the recovery time below 10ms for any topology |
Adv-Ring Multiple rings |
Support multiple rings with various topologies and the recovery time below 10ms for any topology |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Different Service |
Class of Service |
Supports IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter |
Port Mirror |
Supports 3 mirroring types: “RX, TX and Both packet” |
IGMP |
Supports IGMP snooping v1,v2 256 multicast groups and IGMP query |
IP Security |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
SMTP |
Supports SMTP Server and 6 e-mail accounts for receiving event alert |
SNTP |
Supports SNTP to synchronize system clock to Internet |
Bandwidth Control |
Support ingress packet filter and egress packet limit The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000) Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000) |
Relay Alarm |
Provides one relay output for port breakdown, power fail alarm. Alarm Relay current carry ability: 1A @ DC24V |
SNMP Trap |
1. Cold start 2. Link down 3. Link up 4. Authorization fail |
DHCP |
Provides DHCP Client/ DHCP Server/ Port and IP Binding |
DNS |
Provide DNS client feature and support Primary and Secondary DNS server. |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore. |
Factory reset & Watchdog design |
Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances |
ifAlias |
Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface |
*Future Release **Optional
|
- ICES-3080
8 10/100TX Managed Industrial Switch; -20°C to 60°C
- ICES-3080-E
8 10/100TX Managed Industrial Switch; -40°C to 75°C
- ICES-3080-H-E
8 10/100TX with Env monitoring Managed Industrial Switch; -40°C to 75°C
DIN Rail Power
AD1048-24FS |
4VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.) |
AD1024-24F | 24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.) |
AD1240-48S |
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) |
AD1120-48F |
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) |