ICPS-1140-BE

4Port 10/100TX + 1 10/100TX uplink W/. 4 PoE Injector Industrial Switch  

  • Complies with IEEE 802.3at+ PoE Standard
  • Redundant power supply with overload current protection
  • Wide operating temperature range from -40°C to 75°C
  • High power model provides up to 30W power output per port

The Netzin ICPS-1140-BE is a 4-port 10/100TX +1 10/100TX uplink with 4 PoE Hi power booster Injector Industrial PoE Switch for plug-and-play installation. This slim switch is designed with Wall-mountable or DIN rail mountable, making installation more easy.

Besides redundant power supply with overload current protection. Featured with relay contact to alarm system function, the ICPS-1140-BE can immediately notify of power failure event.

The ICPS-1140-BE is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.

The Netzin ICPS-1140-BE is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet. The ICPS-1140-BE can be used in extreme environments with an operating temperature range of -40°C to 75°C.

The ICPS-1140-BE is the high power model which provides higher power output up to 30W per port for devices that require higher power supply.

  • System Interface/Performance
    • RJ-45 port support Auto MDI/MDI-X Function
    • Embedded 4-port PoE Injector Function
    • Store-and-Forward Switching Architecture
    • Back-plane (Switching Fabric): 1.6Gbps
    • 1K MAC address table
  • Supports Wide Operating Temperature (-40°C~75°C)
  • IP-30 Metal Housing with DIN Rail and Wall Mount Design
  • DC 48V Redundant Power
  • Wide voltage input from 24V~54V (Support @ ICPS-1140-BE only)
  • Polarity reverse protection & removable terminal block

 

IEEE Standards

IEEE802.3 10Base-T Ethernet

IEEE802.3u 100Base-TX

IEEE802.3x Flow Control and Back Pressure

IEEE 802.3At+ PoE specification

Switch Properties

Back-plane (Switching Fabric): 1.6Gbps Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes  

Transfer Rate

14,880pps for Ethernet port

148,800pps for Fast Ethernet port

Connectors

10/100TX: 5 x RJ-45 with auto MDI/MDI-X function

Support 4 PoE injector function

MAC Address

1024 MAC addresses

Processing

Store-and-Forward

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable

EIA/TIA-568 100-ohm (100m)

PoE Mode

RJ-45 port #1 – #4 support IEEE 802.3at End-point; Alternative A mode.

Protocol

CSMA/CD

Case Dimension

Metal case,IP-30; 36.2mm(W)x105mm(D)x142mm(H)

Weight

648g

LED

Power Indicator
Green LED x 2
10/100Base-T(X) RJ45 port indicator
Green for port Link/Act. Amber for Duplex/Collision

Power Supply

48VDC (44~56VDC) for ICPS-1140-E, 12V~48VDC for ICPS-1140-BE Redundant power with polarity reverse protect function and removable terminal block

PoE Power

POE power per port 30watts. Maximum 36Watts

Maximum total power 200Watts, Supports

IEEE802.3af/at

Consumption

5.76 Watts (Full load: Only Ethernet)

Overload Current

Present

Reserve Polarity

Present

Operating Humidity

5% to 95% Non-condensing

Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

EMI

FCC Class A

EMS

EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11

EN61000-6-2

EN61000-6-2

Stability Testing  

IEC60068-2-31 (Drop off)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

MTBF

510304 hrs

Warranty

2 years

*Future Release

**Optional

  • ICPS-1140

4 10/100TX+1 10/100TX uplink w/4 PoE Injector Industrial Switch; Power input 48V DC;-20°C~60°C

  • ICPS-1140-E

4 10/100TX+1 10/100TX uplink w/4 PoE Injector Industrial Switch; Power input 48V DC;-40°C~75°C

  • ICPS-1140-B

4 10/100TX+1 10/100TX uplink w/4 PoE Injector Industrial Switch; Power input 12~48V DC;-20°C~60°C

  • ICPS-1140-BE

4 10/100TX+1 10/100TX uplink w/4 PoE Injector Industrial Switch; Power input 12~48V DC; -40°C~75°C

DIN Rail Power

AD1048-24FS

4VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)

AD1024-24F  24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S 

48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

AD1120-48F

48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)