CPS-34240-GT-SD

Hardware Specification

IEEE Standards

IEEE802.3 10Base-T Ethernet

IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T

IEEE802.3z Gigabit fiber

IEEE802.3x Flow Control and Back Pressure

IEEE802.3ad Port trunk with LACP

IEEE802.3af Power over Ethernet

IEEE802.1d Spanning Tree

IEEE802.1w Rapid Spanning Tree

IEEE802.1s Multiple Spanning Tree

IEEE802.1p Class of Service

IEEE802.1Q VLAN Tag

IEEE802.1x User Authentication (Radius)

IEEE802.1ab LLDP

IEEE802.3az Power Saving

Switch Architecture

Back-plane (Switching Fabric): 128Gbps

Transfer Rate

14,881pps for Ethernet port

148,810pps for Fast Ethernet port

1,488,100pps for Gigabit Fiber Ethernet port

1,488,1000pps for 10G SFP+ Fiber Ethernet port

MAC Address

16K MAC address table

PoE pin assignment

PoE pin assignment

RJ-45 port # 1~# 24 support IEEE 802.3at+ End-point,

Alternative A mode. Per port provides up to 30W

Positive (VCC+): RJ-45 pin 3,6.

Negative (VCC-): RJ-45 pin 1,2.

Connectors

10/100TX: 24 x ports RJ-45 with Auto MDI/MDI-X function

10G/ SFP+ port: 4 x 10G SFP+ socket

RS-232 connector: RJ-45 type

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

Optical Fiber

Distance:

Multi mode:

0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)

0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)

Single mode:

0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))

0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))

Min. TX Output:

Multi mode: -20 dBm

Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm

Max. TX Output:

Multi mode: -14 dBm

Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm

Sensitivity: -36 to -32 dBm(SM); -34 to -30(MM)

Protocol

CSMA/CD

LED

Per unit:Power 1 (Green), Fault (Red ), System alive (Green)

24 port 10/100/1000: Link/Activity (Green), Speed (Green)

SFP port: 4 x LNK/ACT(Green),

Power Supply

AC input 110V~240V,

Overload current protection

Present

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

Standard: 0°C~50°C

I-Type : -10°C~60°C

Storage Temperature

-40°C~70°C

Case Dimension

440 (W) x270 (D) x 44 (H) mm ;Rack mount installation

Weight

4280 g

Fan Number

0

EMI & EMS

CE / FCC

Power Consumption

480 W (Within PoE load) for Ethernet data at full load

Warranty

2 years

Software Specification

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP Agent

SNMP V1/V2c/V3

VLAN

Port Based VLAN

IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)

GVRP (256 Groups)

Double Tag VLAN (Q in Q)

Port Trunk with LACP

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

LLDP-MED

Support LLDP-MED via IPv6.

UDLD

UDLD (Unidirectional Link Detection) is a private protocol to detect a uni-directional fiber link between two Ethernet switches in order to prevent a looped network. UDLD is often used in switched Ethernet networks where Spanning-Tree is required to block one or more ports to prevent a loop from forming.  

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree; IEEE802.1s Multiple Spanning Tree

BPDU GUARD

IPV6 Management

Allow the user access by IPv4 or IPv6,And IPv6 supports the following features.

IPv4/IPv6 Dual Protocol Stack

Auto Configuration

IPv6 Neighbor Discovery

ICMPv6

SNMP over IPv6

HTTP/HTTPS over IPv6

TFTP over IPv6

Ping over IPv6

DHCPv6

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4 priority queues

Port Security

Supports 100 entries of MAC address for static MAC and another 100 for MAC filter

Port Mirror

Supports 3 mirroring types: “RX, TX and Both packet”

IGMP

Supports IGMP snooping v1,v2

256 multicast groups and IGMP query

IP Security

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

SMTP

Supports SMTP Server and 6 e-mail accounts for receiving event alert

SNTP

Supports SNTP to synchronize system clock to Internet

Bandwidth Control

Support ingress packet filter and egress packet limit

The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Ingress filter packet type combination rules are

Broadcast/Multicast/Unknown Unicast packet,

Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Relay Alarm

Provides one relay output for port breakdown, power fail alarm.

Alarm Relay current carry ability: 1A @ DC24V

SNMP Trap

1. Cold start

2. Link down

3. Link up

4. Authorization fail

DHCP

Provides DHCP Client/ DHCP Server/ Port and IP Binding

DNS

Provide DNS client feature and support Primary and Secondary DNS server.

Firmware Update

Supports TFTP firmware update, TFTP backup and restore.

Factory reset & Watchdog design

Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances

ifAlias

Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface