HOME > Products > Indu. Managed Switch > ICPS-3080-GE

ICPS-3080-GE

8 10/100/1000TX w/ 8-Booster PoE Hi-Power SDN Industrial Switch

  • Complies with IEEE 802.3at/af PoE Standard.
  • Advanced PoE Management including of scheduling and detection
  • Build in OVS Open Flow agent. **Optional
  • Support Netzin SDN controller. **Optional
  • Support SSH, SSL, RADIUS/TACACS+
  • Support Denial-of-Service (DOS) prevention.
  • IPV6 & IPV4 Based ACL
  • Built in 802.3az for power saving
  • Support SNMP V2c/V3
  • Support IPV6 Management
  • DDM threshold monitoring with dB values
  • Loop protection prevents network attack and Loopback cable protection.
  • Support Advanced SNMP including QoS, IGMP V2 /V3 snooping and query
Download

The Netzin ICPS-3080-GE is an 8-port 10/100BaseTX industrial SDN switch w/8-Booster PoE Hi-Power Injectors. The advanced SNMP management features include QoS for 8 queues, 802.1q VLAN, 802.1v Protocol Based VLAN, IGMP V2/V3 snooping and query, MLD-Snooping, LLDP-MED, Loop protect prevents network attack and loopback cable protection, as well as SNTP and etc.

The Netzin ICPS-3080-GE supports IEEE802.3at/af standard which can feed HI-power up to 30W/54V; 15W/48V at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. PoE per port status shows voltage, current, watts info as well as to enable / disable ports

Netzin ICPS-3080-GE builds all the important management features required in large network like, DHCP Client, 802.1X authentication, IGMP Query / Snooping, advanced QoS.

The Netzin ICPS-3080-GE is a high-performance Gigabit Managed switch that integrates OVS Open Flow agent. The Open Flow agent can connect to SDN controller to enable a variety of flow-based SDN applications.

ICPS-3080-GE provides a variety of advanced security features to safe guard your network. These security protection functions include 802.1X, RADIUS/TACACS+, HTTPS, SSL, Port Security, Storm Control, Denial-of-Service (DOS) Prevention, Dynamic ARP Inspection, IP Source Guard ,etc.

ICPS-3080-GE enable the state-of-the-art SDN functions for network administrators. By collaborating with Netzin’s IoT controller and applications, ICPS-3080-GE can perform fine-grained, flow-based network management functions, such as switch configuration auto-provisioning, dynamic flow-based network traffic monitoring, and abnormal traffic detection/ rejection

ICPS-3080-GE supports advanced QoS, By collaborating with Netzin’s controller and application, the network administrators can designate the priority of streaming services based on different QoS requirements. ICPS-3080-GE prioritize delay-sensitive services such as voice and video streaming. It provides different classes of services, including flow-based.

The Netzin ICPS-3080-GE With the powerful ACL utility, administrator can restrict sensitive portions of the network from unauthorized users and guard against network attacks. iCPS-3080 support MAC-based ACL, IPV4-based ACL and IPV6-based ACL.    

The Netzin ICPS-3080-GE With built-in IEEE802.3az Energy Efficient Ethernet (EEE) feature and more innovative green feature, ICPS-3080-GE can reduce energy consumption through many smart automatic detection, such as Link Down Power Saving, Cable Length Power Saving, No traffic or Small traffic Power Saving.

The Netzin ICPS-3080-GE is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory and other factory assembly lines where needs PoE functionality. The -E model can be used in extreme environments with an operating temperature range of -30°C to 70°C.

  • RJ-45 Port Support Auto MDI/MDI-X Function
  • Supports IEEE802.3at/af feeding power up to 30W/54V; 15W/48V per PoE port at 48~56VDC
  • SFP slot supports 100/1000 Dual Mode with DDM for SFP diagnostic and monitoring(need to work with SFP with diagnostic function)
  • Back-plane (Switching Fabric): 16 Gbps
  • 8K MAC address table
  • IP-30 Protection with DIN rail and wall mount design
  • Redundant Power Design
  • Built in OVS Open Flow agent ,Support Netzin’s SDN controller
  • Control each flows by QOS service from Netzin’s Controller.
  • IPv6 management
  • IEEE 802.1d Spanning Tree , IEEE 802.1w RSTP& IEEE 802.1s MSTP
  • IGMP with Snooping and Query mode for Multi Media Application; MLD-Snooping for IPV6
  • Support IP multicast dynamic source learning for IP CAM and video.
  • Port Based VLAN, 802.1Q Tag VLAN, GVRP
  • Port Trunk with LACP
  • Supports IEEE 802.1ab LLDP , LLDP-MED , UDLD
  • Supports IEEE 802.1p CoS, 8 priority queues per port
  • Port base, Tag Base and Type of Service Priority
  • Supports Ingress Packet Filter and Egress Rate Limit
  • Supports Broadcast/Multicast Packet Filter Control
  • Port Mirror: Monitor traffic in switched networks
    • TX, RX, Both of TX and RX Packet
  • Security
    • Port Security: MAC address entries/Filter/MAC violation
    • RADIUS/TACACS+
    • Login Security: IEEE802.1X
    • HTTPS and SSL
    • Denial-of-Service(DOS)Prevention
    • Dynamic ARP Inspection,
    • IP Source Guard
    • Loop Protection: prevents network attack, loopback cable detection and Miss-wiring avoidance
  • SNMP Trap
    • Device cold start, Power status, Authentication failure, Ring changed, Port Link up/Link down.
  • Relay Alarm Output System Events
  • Supports PoE Management
  • SNTP for time sync
  • TFTP Firmware Update & System Configure Restore/Backup
  • Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances

Hardware Specification

IEEE Standards

IEEE802.3 10Base-T Ethernet

IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T

IEEE802.3x Flow Control and Back Pressure

IEEE802.3ad Port trunk with LACP

IEEE802.3af Power over Ethernet

IEEE802.1d Spanning Tree

IEEE802.1w Rapid Spanning Tree

IEEE802.1s Multiple Spanning Tree

IEEE802.1p Class of Service

IEEE802.1Q VLAN Tag

IEEE802.1x User Authentication (Radius)

IEEE802.1ab LLDP

IEEE802.3az Power Saving

Switch Architecture

Back-plane (Switching Fabric): 16Gbps

Transfer Rate

14,881pps for Ethernet port

148,810pps for Fast Ethernet port

1,488,100pps for Gigabit Fiber Ethernet port

MAC Address

8K MAC address table

Flash ROM

16Mbytes

DRAM

128Mbytes

Connectors

10/100/1000TX: 8 x ports RJ-45 with Auto MDI/MDI-X function

RS-232 connector: RJ-45 type

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

Optical Fiber

Distance:

Multi mode:

0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)

0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)

Single mode:

0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))

0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))

Min. TX Output:

Multi mode: -20 dBm

Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm

Max. TX Output:

Multi mode: -14 dBm

Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm

Sensitivity: -36 to -32 dBm(SM); -34 to -30(MM)

Protocol

CSMA/CD

PoE Mode

RJ-45 port # 1~# 8 support IEEE 802.3at+ End-point,

Alternative A mode. Per port provides up to 30W

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault (Red), System alive (Green)

8 port 10/100/1000: Link/Activity (Green), Speed (Green)

PoE LED: 8 x LNK(Green),

Power Supply

PoE input 48V~56VDC, Ethernet Data input 12V~48VDC;  Redundant power connective removable terminal block for master and slave power;

Overload current protection

Present

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

Standard: -10°C~60°C / 14°F~140°F

Wide Operating Temperature for E models:

-30°C~70°C / -22°F~158°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

IP-30, 59.6 (W) x 105 (D) x 152 (H) mm

Weight

900 g

Fan Number

0

Installation

Wall mount or DIN-type cabinet install

MTBF

190288 hrs

EMI & EMS

FCC Class A

EN61000-4-2 (ESD),

EN61000-4-3 (RS),

EN61000-4-4 (EFT),

EN61000-4-5 (Surge),

EN61000-4-6 (CS),

EN61000-4-8,

EN61000-4-11

EN61000-6-2(EMS)

EN61000-6-4(EMI)

Stability Testing

IEC60068-2-31 (Drop off), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Power Consumption

9.86 W (no PoE load) for Ethernet data at full load

PoE Power Budget

240W at 52VDC ;  200W at 48VDC;

Warranty

3 years

Software Specification

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP Agent

SNMP V1/V2c/V3

VLAN

Port Based VLAN

IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)

GVRP (256 Groups)

Double Tag VLAN (Q in Q)

Port Trunk with LACP

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

LLDP-MED

Support LLDP-MED via IPv6.

UDLD

UDLD (Unidirectional Link Detection) is a private protocol to detect a uni-directional fiber link between two Ethernet switches in order to prevent a looped network. UDLD is often used in switched Ethernet networks where Spanning-Tree is required to block one or more ports to prevent a loop from forming.  

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree; IEEE802.1s Multiple Spanning Tree

IPV6 Management

Allow the user access by IPv4 or IPv6,And IPv6 supports the following features.

IPv4/IPv6 Dual Protocol Stack

Auto Configuration

IPv6 Neighbor Discovery

ICMPv6

SNMP over IPv6

HTTP/HTTPS over IPv6

TFTP over IPv6

Ping over IPv6

DHCPv6

PoE Management

Enable/Disable PoE port and display PoE port status

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4 priority queues

Port Security

Supports 100 entries of MAC address for static MAC and another 100 for MAC filter

Port Mirror

Supports 3 mirroring types: “RX, TX and Both packet”

IGMP

Supports IGMP snooping v1,v2

256 multicast groups and IGMP query

IP Security

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

SNTP

Supports SNTP to synchronize system clock to Internet

Bandwidth Control

Support ingress packet filter and egress packet limit

The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Ingress filter packet type combination rules are

Broadcast/Multicast/Unknown Unicast packet,

Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Relay Alarm

Provides one relay output for port breakdown, power fail alarm.

Alarm Relay current carry ability: 1A @ DC24V

SNMP Trap

1. Cold start

2. Link down

3. Link up

4. Authorization fail

DHCP

Provides DHCP Client/ DHCP Server/ Port and IP Binding

DNS

Provide DNS client feature and support Primary and Secondary DNS server.

Firmware Update

Supports TFTP firmware update, TFTP backup and restore.

Factory reset & Watchdog design

Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances

ifAlias

Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface

*Future Release

**Optional

  • ICPS-3080-G

8 10/100/1000TX w/. PoE Hi power Managed Industrial Switch; -10°C to 60°C

  • ICPS-3080-GE

8 10/100/1000TX w/. PoE Hi power Managed Industrial Switch; -30°C to 70°C

  • ICPS-3080-GE-SD

8 10/100/1000TX + 2 100/1000T SFP w/. PoE Hi power Managed Industrial SDN Switch; -30°C to 70°C

DIN Rail Power

AD1048-24FS

4VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F  24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S 

48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F

48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)