HOME > Products > Indu. Managed Switch > ICPS-3280-R

ICPS-3280-R

8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/ 8- PoE Hi-Power Managed Industrial Switch

  • Complies with IEEE 802.3at/af PoE Standard
  • Advanced PoE Management including of scheduling and detection
  • Support SNMP management v1/v2c/v3
  • Support ACL for advanced control.
  • Loop protection prevents network attack.
  • Support IPV6 Management
  • Support MLD snooping
  • Support wide operation temp -40~75 degree for –E model.
Download

The Netzin iCPS-3280-R is an 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial switch w/8 PoE Hi-Power Injectors. The SFP connection is suitable with 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, Double tag VLAN, IGMP V2/V3 snooping, Loop protect prevents network attack and loopback cable protection, as well as SNTP and SMTP etc.  .

The Netzin iCPS-3280-R supports IEEE802.3at/af standard which can feed HI-power up to 30W/54V; 15W/48V at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. PoE per port status shows voltage, current, watts info as well as to enable / disable ports

Netzin iCPS-3280-R builds all the important management features required in large network like ,Q-inQ, DHCP Client, 802.1X authentication, IGMP Snooping, advanced QoS

The Netzin iCPS-3280-R is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory and other factory assembly lines where needs PoE functionality. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

  • RJ-45 Port Support Auto MDI/MDI-X Function
  • Supports IEEE802.3at/af feeding power up to 30W/52V; 15W/48V per PoE port at 48~52VDC
  • Input range from 48V~56VDC to feed the same output voltage over Ethernet cable (PoE function)
  • SFP slot supports 1000 Dual Mode with DDM for SFP diagnostic and monitoring(need to work with SFP with diagnostic function)
  • Back-plane (Switching Fabric): 5.6Gbps
  • 1Mbits Packet Buffer / 8K MAC address table
  • IP-30 Protection with DIN rail and wall mount design
  • Redundant Power Design
  • IEEE 802.1d Spanning Tree , IEEE 802.1w RSTP,802.1s MSTP
  • IGMP with Snooping for Multi Media Application; Menu multicast filtering by ports
  • Support IP multicast dynamic source learning for IP CAM and video.
  • Port Based VLAN, 802.1Q Tag VLAN, GVRP
  • Double Tag VLAN (Q in Q),
  • Port Trunk with LACP
  • Supports IEEE 802.1ab LLDP
  • Supports IEEE 802.1p CoS, 4 priority queues per port
  • Port base, Tag Base and Type of Service Priority
  • Supports Ingress Packet Filter and Egress Rate Limit
  • Supports Broadcast/Multicast Packet Filter Control
  • Port Mirror: Monitor traffic in switched networks
  • TX, RX, Both of TX and RX Packet
  • System Log Server/Client
  • Security
    • Port Security: MAC address entries/Filter/MAC violation
    • IP Security: IP address security management to prevent unauthorized intruder
    • Login Security: IEEE802.1X/RADIUS
    • Loop Protection: prevents network attack, loopback cable detection and Miss-wiring avoidance
  • Optional environmental monitoring for system input voltage, current, ambient temperature
  • SNMP Trap
  • Device cold start, Power status, Authentication failure, Ring changed, Port Link up/Link down.
  • Relay Alarm Output System Events
  • Supports PoE Weekly Scheduling
    • Hourly basis, power saving and meets economic resource management requirement
  • TFTP Firmware Update & System Configure Restore/Backup
  • Factory reset bottom can restore all setting back to factory default and Watchdog design to automatically reboot switch under certain circumstances

Hardware Specification

IEEE Standards

IEEE802.3 10Base-T Ethernet

IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T

IEEE802.3z Gigabit fiber

IEEE802.3x Flow Control and Back Pressure

IEEE802.3ad Port trunk with LACP

IEEE802.3af Power over Ethernet

IEEE802.1d Spanning Tree

IEEE802.1w Rapid Spanning Tree

IEEE802.1p Class of Service

IEEE802.1Q VLAN Tag

IEEE802.1x User Authentication (Radius)

IEEE802.1ab LLDP

Switch Architecture

Back-plane (Switching Fabric): 5.6Gbps

Transfer Rate

14,881pps for Ethernet port

148,810pps for Fast Ethernet port

1,488,100pps for Gigabit Fiber Ethernet port

Packet Buffer

4Mbits

MAC Address

8K MAC address table

Flash ROM

4Mbytes

DRAM

32Mbytes

Connectors

10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function

10/100/1000T/SFP Combo port: 2 x RJ-45 + 2 x 100/1000 SFP socket with DDM

RS-232 connector

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

Optical Fiber

Distance:

Multi mode:

0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)

0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)

Single mode:

0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))

0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))

Min. TX Output:

Multi mode: -20 dBm

Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm

Max. TX Output:

Multi mode: -14 dBm

Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm

Sensitivity: -36 to -32 dBm(SM); -34 to -30(MM)

Protocol

CSMA/CD

PoE pin assignment

RJ-45 port # 1~# 8 support IEEE 802.3at+ End-point,

Alternative A mode. Per port provides up to 30W

Positive (VCC+): RJ-45 pin 3,6.

Negative (VCC-): RJ-45 pin 1,2.

 

LED

Per unit:Power 1 (Green), Power 2 (Green), Fault (Red ), Master (Green)

8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)

SFP port: LNK/ACT(Green),

1000T : LNK/ACT(Green), 1000M(Green)

Power Supply

PoE input 48V~56VDC, Ethernet Data input 12V~48VDC;  Redundant power connective removable terminal block for master and slave power;

Overload current protection

Present

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

Standard: -10°C~60°C / -4°F~140°F

Wide Operating Temperature for E models:

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

IP-30, 440 (W) x 200 (D) x 44 (H) mm

Weight

2000 g

Fan Number

0

Installation

Rack mount install

EMI & EMS

FCC Class A, CE EN61000-4-2,

CE EN61000-4-3, CE EN61000-4-4,

CE EN61000-4-5, CE EN61000-4-6,

CE EN61000-4-8, CE EN61000-4-11,

CE EN61000-6-2, CE EN61000-6-4

Safety

CE/EN60950-1

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

Power Consumption

9.86 W (no PoE load) for Ethernet data at full load

PoE Power Budget

240W at 48VDC

Warranty

1 years

 

 

Software Specification

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP MIB

RFC 1215 Traps MIB, RFC 1213 MIBII,

RFC 1157 SNMP MIB, RFC 1493 Bridge MIB,

RFC 2674 VLAN MIB, RFC 1643 EtherLike,

RFC 1757 Rmon, RSTP MIB,

Private MIB, PoE MIB, LLDP MIB

VLAN

Port Based VLAN

IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)

GVRP (256 Groups)

Double Tag VLAN (Q in Q)

 

Port Trunk with LACP

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree;

Weekly PoE Scheduling

Weekly scheduling control by hourly basis

Each port can be configured with different rules

PoE forced mode

To force feeding power via Ethernet cable regardless auto hand-shaking

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4 priority queues

Port Security

Supports 100 entries of MAC address for static MAC and another 100 for MAC filter

 

 

Port Mirror

Supports 3 mirroring types: “RX, TX and Both packet”

IGMP

Supports IGMP snooping v1,v2

256 multicast groups

IP Security

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

SMTP

Supports SMTP Server and 6 e-mail accounts for receiving event alert

SNTP

Supports SNTP to synchronize system clock to Internet

Bandwidth Control

Support ingress packet filter and egress packet limit

The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

Ingress filter packet type combination rules are

Broadcast/Multicast/Unknown Unicast packet,

Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000)

DHCP

Provides DHCP Client/ DHCP Server/ Port and IP Binding

Firmware Update

Supports TFTP firmware update, TFTP backup and restore.

Factory reset

Factory reset bottom can restore all setting back to factory default
  • ICPS-3280-R-AC

8 10/100TX + 2 10/100/1000T/GIGA SFP Combo w/8 Booster PoE Hi power Managed Industrial Switch; -10°C to 60°C

  • ICPS-3280-RE

8 10/100TX + 2 10/100/1000T/ GIGA Speed SFP Combo w/8 Booster PoE Hi power Managed Industrial Switch; -40°C

to75°C

DIN Rail Power

AD1048-24FS

 

AD1024-24F

 

AD1240-48S

 

AD1120-48F

 

24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)

24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C

(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

Mini GBIC (SFP)

  • 8330-162 MINI GBIC 1000SX (LC/0.5km) Transceiver
  • 8330-163 MINI GBIC 1000SX2 (LC/2km) Transceiver
  • 8330-165 MINI GBIC 1000LX (LC/10km) Transceiver
  • 8340-0591 MINI GBIC 1000LHX (LC/40km) Transceiver
  • 8330-166 MINI GBIC 1000XD (LC/50km) Transceiver
  • 8330-169 MINI GBIC 1000XD (LC/60km) Transceiver
  • 8330-167 MINI GBIC 1000ZX (LC/80km) Transceiver
  • 8330-170 MINI GBIC 1000EZX (120km) Transceiver
  • 8330-168 MINI GBIC 1000T (100m) Transceiver
  • 8330-061 100Base LX 30KM, Single-mode, LC Transceiver
  • 8330-060 100Base FX 2KM, Multi-mode, LC Transceiver
  • 8330-188 LTSFP-1000BX-10KM Transceiver (WDM 1310)
  • 8330-189 LTSFP-1000BX-10KM Transceiver (WDM 1550)
  • 8330-186 LTSFP-1000BX-20KM Transceiver (WDM 1310)
  • 8330-187 LTSFP-1000BX-20KM Transceiver (WDM 1550)
  • 8330-180 LTSFP-1000BX-40KM Transceiver (WDM 1310)
  • 8330-182 LTSFP-1000BX-40KM Transceiver (WDM 1550)
  • 8330-181 LTSFP-1000BX-60KM Transceiver (WDM 1310)
  • 8330-183 LTSFP-1000BX-60KM Transceiver (WDM 1550)
  • 8330-184 LTSFP-1000BX-80KM Transceiver (WDM 1490)
  • 8330-185 LTSFP-1000BX-80KM Transceiver (WDM 1550)